|
Hoof Trimmers
For Sheep, Goats and Cattle
|
Sheep and Goat Hoof Trimmer
(Designed For the Smaller Animal Hoof)
This hoof trimmer was designed to make trimming hooves as smooth and easy as possible. This trimmer can cut fast but does not pull you into the cut and is not overly aggressive. Because of the design of the tool you are in control of how fast or how slow you want to cut. When it’s time to finish the hoof you can put that nice smooth finish on as well.
Sheep and Goat Hoof Trimmer $225.00
Inserts (10 per box) $37.50
|
Features
This trimmer was designed in part by Mr. Roger Carroll’s recommendations. Using his knowledge and experience in the hoof trimming field we came up with what we believe to be a very efficient and easy to use hoof trimmer
The cutter is 4” in diameter and has 4 carbide inserts that can be indexed 4 times. It is threaded to mount directly to any 4” or 4 ½” angle grinder that has a 5/8” -11 thread. It will not slip and is always in balance with all inserts in place.
The trimmer comes with 4 square carbide inserts ---- 4 flat head screws and 1 hex T handle wrench. We keep replacement screws and carbide inserts in stock.
- Call us for all your replacement parts / We ship the day we receive your order
- Caution-- Use light oil on the screws to protect screws from rusting and galling.
Always use caution to make sure the screws are started straight and not cross threaded when you rotate or replace the inserts.
THIS IS A CUTTING TOOL AND YOU ARE RESPONSIBLE FOR WHAT IT CUTS!
Always Keep Hands and Body Clear Of the Cutters!
|
|
Cattle Hoof Trimmer
Designed To Cut On Both The Front and Back Side. This hoof trimmer was designed to make trimming hooves as smooth and easy as possible. This trimmer can cut fast but does not pull you into the cut and is not overly aggressive. Because of the design of the tool you are in control of how fast or how slow you want to cut. When it’s time to finish the hoof you can put that nice smooth finish on as well.
Cattle Hoof Trimmer $275.00
Inserts (10 per box) $37.50
|
Features
This trimmer was designed in part by Mr. Roger Carroll’s recommendations. Using his knowledge and experience in the hoof trimming field we came up with what we believe to be a very efficient and easy to use hoof trimmer
The cutter is 4” in diameter and has 4 carbide inserts that can be indexed 4 times. It is threaded to mount directly to any 4” or 4 ½” angle grinder that has a 5/8” -11 thread. It will not slip and is always in balance with all inserts in place.
The trimmer comes with 4 square carbide inserts ---- 4 flat head screws and 1 hex T handle wrench. We keep replacement screws and carbide inserts in stock.
- Call us for all your replacement parts / We ship the day we receive your order
- Caution-- Use light oil on the screws to protect screws from rusting and galling.
Always use caution to make sure the screws are started straight and not cross threaded when you rotate or replace the inserts.
THIS IS A CUTTING TOOL AND YOU ARE RESPONSIBLE FOR WHAT IT CUTS!
Always Keep Hands and Body Clear Of the Cutters!
|
|
Major Credit Cards Accepted
|
